600 Tonne Column Press
This 600t One Column Press sets itself apart thanks to its very good accessibility and its compact design.
- Suitable for the following ferrules
- Aluminium ferrules up to ZEN 34 (Multibite ZEN40)
- Flemish Eye ferrules up to 1 1/2"
- Terminals normal shank 7/8" / progressive 1"
|Max. pressure capacity||6000||kN|
|Max. piston stroke||85||mm|
|Max. oil pressure||425||bar|
|Unloaded stroke speed (up to 1520 kN)||10||mm/s|
|Loaded stroke speed||2,7||mm/s|
|Swaging die take up||156 x 110||(W x H) mm|
|With angle packings||100 x 78 or 80 x 78||(W x H) mm|
|Power supply||18,5 kW / 400 V / 50 Hz||kW / V / Hz|
|Stroke limit||smooth, electronic control||Quality / Type|
|Dimensions||2170 x 865 x 1992||(L x W x H) mm|
Cutting-edge technology from Germany, tested for decades under extreme conditions.
Constructed from high quality components, specially fabricated to our standards from leading manufacturers, ensuring that your machine is ready for use at all times.
Easy to Use
The controls are located at the right spot and you can operate them intuitively. Documentation and signage are provided.
These presses comply with the current valid EU Machinery Directive 2006/42/EC and are manufactured according to ISO9001.
High Speed / Performance
This press stands apart thanks to their high engine performance and thus high press speeds. At low pressure, press speed is the maximum permissible 10 mm/s.